基于等效电路模型与CDKF的锂离子电池荷电状态(SOC)估计

锂离子电池在社会生产各领域应用广泛,由于其复杂的电化学系统,状态检测难度较大,给供电保障带来不利影响.结合Thevenin等效电路与中心差分卡尔曼滤波法(CDKF),构建了一种聚合物锂离子电池的荷电状态(SOC)估计模型.MATLAB仿真验证表明,该模型能有效防止安时计数误差累积,电池SOC估计误差不超过5%.     

不同强度磁暴期间热层大气密度响应特征分析

利用CHAMP卫星数据，对2002-2008年12个不同强度磁暴事件期间的热层大气密度变化特征进行分析，并研究对应磁暴期间大气模式NRLMSISE-00分布特征.结果表明，大磁暴期间日侧大气密度峰值从高纬到低纬的时间延迟为2h，中小磁暴期间的延迟时间为3～4h；春秋季暴时大气密度分布基本呈南北对称分布，而夏冬季大气密度的分布是夏半球大于冬半球，春秋季暴时大气密度大于夏冬季；NRLMSISE-00大气模式得到的热层大气密度很好的体现了半球分布以及季节分布的特征，但模式模拟结果偏小；Dst指数峰值比ap指数峰值更能反应大气密度的变化情况.      

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

行星着陆大气进入段自适应滑模抗扰控制方法

针对行星探测器着陆过程可能存在的干扰影响着陆精度问题，提出了一种抗干扰控制方法。首先建立行星探测器着陆控制模型，利用非线性干扰观测器实现对系统外部干扰的估计；在此基础上提出一种自适应滑模控制律，使得系统状态快速收敛到平衡点附近。最后，将该方法应用于火星着陆场景进行仿真。结果表明，提出的自适应滑模控制方法能够在未知扰动存在的情况下，有效实现行星探测器安全着陆，提高着陆任务的成功率。     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow with vortex production——A general model

By using a special momentum approach and with the help of interchange between singularity velocity and induced flow velocity, we derive in a physical way explicit force formulas for twodimensional inviscid flow involving multiple bound and free vortices, multiple airfoils, and vortex production. These force formulas hold individually for each airfoil thus allowing for force decomposition, and the contributions to forces from singularities(such as bound and image vortices,sources, and doublets) and bodies out of an airfoil are related to their induced velocities at the locations of singularities inside this airfoil. The force contribution due to vortex production is related to the vortex production rate and the distance between each pair of vortices in production, thus frameindependent. The formulas are validated against a number of standard problems. These force formulas, which generalize the classic Kutta–Joukowski theorem(for a single bound vortex) and the recent generalized Lagally theorem(for problems without a bound vortex and vortex production) to more general cases, can be used to identify or understand the roles of outside vortices and bodies on the forces of the actual body, optimize arrangement of outside vortices and bodies for force enhancement or reduction, and derive analytical force formulas once the flow field is given or known.     

高教机天线布局影响通讯距离研究与改进

某型高级教练机在试飞中,出现空地通讯距离不满足战技指标要求的问题。经过分析发现,由于超短波电台天线作为单极天线,其安装布局未满足天线本身要求,即接地面尺寸过小、近场区环境复杂等,导致天线辐射性能受到影响。本文对天线阻抗和方向性系数进行了研究分析,并根据飞机情况制定相应的改进方案。     

民用飞机静气动弹性载荷计算方法研究

以某大型客机为例,根据气动外形利用有限元软件PANTRAN建立高阶气动面元,利用ZONAIR静气动弹性方法,分析了其弹性载荷,包含气动力系数、过载、迎角,并与刚性载荷进行了对比。此方法合理可靠,可用于民用飞机的弹性载荷设计分析。     

减振器布局和跨度对捷联惯组振动影响

针对采用空间五点减振的捷联惯组系统, 介绍了其总体设计方案, 对减振 系统的固有频率进行了理论推导和模态仿真,对不同减振布局下捷联惯组的冲击响应进 行了分析。结果表明：对于空间五点减振的捷联惯组,其线振动固有频率不随减振器的 位置而改变,而角振动固有频率随减振器跨度的增大而增大;单独改变第5 点减振器的 位置对调整系统角振动固有频率的作用有限,但可有效影响系统的偏心量,进而显著改 变IMU 在冲击下的角振动响应幅值,较小的偏心量可以降低系统在冲击作用下的角振动 幅值;在系统偏心量不变的情况下,同步增加除第5 点外的其余4 个减振器的跨度,有 利于减少系统的角振动响应幅值。     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.